The Best Gardening Articles,
Community Forum and More!
Last Updated
Thursday, August 28, 2008 08:50 PM
Free Garden Newsletter Sign Up!
Garden
Tips And Garden Secrets!
Starting Seeds Indoors
Growing
annual flowers and vegetables from seeds started indoors can be
rewarding. Vigorous plants started
indoors and then transplanted will flower sooner and produce an earlier
harvest than those started directly outdoors. Home gardeners can also
grow cultivars which may not be available from local nurseries as
transplants.
Selecting Seeds for Planting
Purity
and trueness to type—Good seeds should not contain seed of other
crops or weeds and should be the correct cultivar. For best results, buy
quality seed from a reliable dealer. In Indiana, vegetable seeds must
meet minimum germination standards prescribed by law. If they fall below
the legal minimum, the germination percentage must be shown on the
package.
Packages and storage—Seeds sold in packages should show the crop,
cultivar, germination percentage, and chemical seed treatments, if any.
Seeds should be kept dry and cool to insure good germination at
planting. Laminated foil packets insure dry storage. Paper packets are
best kept in tightly closed cans or jars until seeds are planted.
Hybrid
seeds—Many new vegetable and flower seeds are hybrids. Hybrid seed
often costs more than seed of non-hybrid cultivars. However, hybrids
usually have increased vigor, better uniformity, larger yields and
sometimes specific disease resistance or other unique cultural
characteristics. Each gardener must decide whether the added benefit
justifies the added cost. It usually does.
Saving
your own seed—Some experienced gardeners save their own seed. This
practice requires the gardener to know the proper techniques for
selecting, producing, handling, and storing the seed. Seed from hybrid
plants should never be kept. Likewise, it may be unwise to keep seed
from plants that are easily cross-pollinated, such as sweet corn,
squash, and pumpkins. Bean seed may carry viruses and other diseases
from one season to the next.
Containers for Sowing Seeds
Containers for starting seeds should be clean and sturdy and should fit
into the space available for growing plants in the home. Having the
proper container helps get seedlings off to a good start and may save
work in later stages of seed development.
Wood
flats, fiber trays, plastic trays—Plants that are easy to transplant
may be seeded directly in flats or trays for later transplanting into
individual pots or wider spacing in flats. Starting seeds in such
containers saves space as compared to seeding directly into individual
pots. However, where time is more important than space, direct seeding
in pots may be preferred.
Clay
and plastic pots—Both types can be cleaned and reused and are
excellent for growing transplants.
Plants to be transplanted must be removed, and the soil ball must be
carefully cut apart at planting time. Seeds may also be planted directly
into the pots.
Peat
pots—These popular pots are made from peat or paper waste fibers and
may be purchased individually or in strips or blocks. They are porous
and provide excellent drainage and air movement. The entire pot can be
planted, so there is minimum root disturbance at planting time.
Compressed peat pellets—When dry, expandable peat pellets are about
the size of a silver dollar, but somewhat thicker. When placed in water,
they swell to form a cylindrical container filled with peat moss, ready
for seeding or transplanting. They may be planted directly into the
garden. Use the pellets in trays so they are easily watered and held
upright. Be sure they are placed so the open side is up.
Plastic flats, packs, and plugs—An increasing number of different
types of plastic flats and packs are now being sold. In many types, you
grow each plant in a cell and then merely “pop” it out at planting time.
With care, these plastic flats and packs can be reused.
Soil-peat-sand-mix—Large seeds or vigorous-growing seeds may be
planted in a mix of two parts loam garden soil, one part shredded peat
moss, and two parts of either perlite, vermiculite, or sharp sand. Soil
sterilization is necessary.
Milled
sphagnum moss—A ground sphagnum moss is sometimes used for starting
seeds, since it inhibits the seedling disease damping-off. It should be
well-moistened before use. Since it contains no fertility, prompt
fertilization is essential after seeds have germinated.
Layered mixes—Another technique used for germinating seeds is to
partially fill a flat or pot with sterilized soil mix, and then top it
with a layer of vermiculite or milled sphagnum moss in which the
seeds are planted. After germination, roots of seedlings move from this
top area into the soil mix, which provides fertility. Adding liquid
fertilizer is less critical.
Peat
humus—Exercise caution using peat humus (or Michigan peat) in the
place of sphagnum peat moss in seed germination mixes. There is wide
variation in the water holding capacity, aeration characteristics and pH
of the products sold under the name peat humus. It is safer to insist on
sphagnum peat moss or used milled sphagnum moss.
Sterilizing Mixes and Containers
To guard
against damping-off and other plant diseases carried in the soil and on
containers, be sure to clean and sterilize materials.
Mixes—Place
the moist, but not wet, soil mix in a container which can be covered to
keep the soil from drying rapidly. If a cover is not available, use
aluminum foil, and seal it down at the edges. The mixes may be
sterilized directly in the pots or flats in which they are to be used.
In addition to killing disease organisms, many weed seeds are killed by
sterilization.
Soil Mixes and Other Growing Media
The medium used for starting
seeds should be loose, well-drained, and of fine texture. You may use
commercially prepared mixes or you may mix materials yourself.
Vermiculite—This material when used alone provides good seed
germination. It is clean, and if not contaminated during handling, will
not need sterilization. If other seeding mixes are used, it is useful
for covering seeds. It does not form a crust, and seedlings can easily
emerge. Vermiculite is available in several grades. For seeding, a fine
grade is best.
Suggested Soil Mixture
Ingredients 1 gallon 1 bushel
_______________________________________________
Shredded
sphagnum peat moss 2 qts 1/2 bu
Vermiculite #3, or 4 2 qts 1/2 bu
Limestone, dolomitic preferred 1 Tbsp 6 Tbsp
20%
superphosphate
(powdered) 1/2 Tbsp 2-1/2 Tbsp
5-10-5 —
7-1/2 Tbsp
Iron (chelated
such
as NaFe,
138 or 330) — 1/2 tsp
Wetting
agent1 — 1/2 tsp in
1/2 gal
water
________________________________________________
1 Wetting
agents or sufactants increase the ease of wetting peat moss and mixes
high in organic matter. A small quantity added to water will help to
uniformly distribute applied water. Dish detergent may be used as a
wetting agent at double the recommended rate. Note: Bushels are level
full, not packed. Tablespoons and teaspoons are level amounts.
Synthetic mixtures—Mixes that contain no soil are available for
growing seeds. These contain either a combination of peat moss and
vermiculite or peat moss and perlite. They may be purchased ready-made
or can be mixed at home. These mixes as well as vermiculite used alone,
have little fertility. Seedlings must be watered with a diluted
fertilizer solution soon after they emerge.
Soil-vermiculite mix—Seeds may be started in a mixture of about
one-third loam garden soil and two-thirds vermiculite. Since good soil
contains some fertility, prompt fertilization after germination is not
essential. When garden soil is used, the mix must be sterilized before
seeds are planted in it. After germination, seedling roots move into the
soil mix, which provides fertility.
Pinch a
small hole in the center of the foil, and insert the bulb end of a meat
or candy thermometer into the soil so that the bulb is in the center of
the soil mass. Place the pan in an oven at 200-220°F (93-105°C). Keep
the soil in the oven until the thermometer shows a temperature of
160-180°F (71-82°C). Remove the pan and allow it to cool. Baking the
soil will give off a strong odor, so some ventilation may be desirable.
The time necessary for sterilization depends upon the volume of the
soil, as well as its moisture content. Dry soil cannot be sterilized
well. Some home gardeners prefer to place a raw potato in the center of
the soil and bake in a medium oven until the potato is done.
After the
soil has been sterilized, make sure the containers, tools, and working
area are also clean and sterile. Clean soil can be easily re-infected by
careless techniques. In sterile soil, reintroduced diseases may spread
faster than they would in unsterilized soil.
Containers—All containers that have been used should be washed
thoroughly in soapy water to remove all debris. Do not put wooden flats
or plastic containers in the oven. Rinse wood and plastic items in a
solution of one part chlorine bleach and ten parts water. Let them dry
before filling with soil.
Seed—Many
seeds are pre-treated with a fungicide to protect the seed from diseases
such as damping-off. These seeds may be dusted with a white, pink,
green, or blue color fungicide. If seeds have not been treated, dust
them with a fungicide before sowing. Be sure to wear gloves when
handling the fungicide.
Seeding
The
proper time for sowing seeds depends upon when plants may normally be
moved outdoors. The periods range from 4 to 14 weeks, depending upon the
speed with which seedlings grow and the conditions in the home. Read the
label on the seed packet for any planting directions.
1. Fill
the container to within 3/4 inch from the top with the mixture to be
used. If it is dry, moisten the mixture before filling. Make sure that
the container has adequate drainage. Before filling, cover holes or
cracks in the container with sphagnum moss or broken crockery.
2. Level
and gently firm the planting medium. Use a clean small board for
leveling and firming. Do not press too hard in firming the surface or
poor aeration and decreased root growth will result.
3. Make
shallow rows about 1-2 inches apart in the flat using a narrow board or
large wooden marker label. When different seeds are used in the same
container, they are easier to keep track of if planted in rows. If only
one type of seed is used in each flat, then seed may be scattered or
broadcast over the surface.
4. Sow
seeds uniformly and thinly in the rows. Many small, round seeds may be
slowly dropped into the rows by tapping the package as it is held over
the rows. Label each row promptly with plant type, variety, and date of
planting. Use pencil or waterproof pen for labeling. Plant large seeded
vegetables, such as cucumber, muskmelon, and watermelon, directly into
peat pots. Other seeds may also be handled this way to save
transplanting, but sowing is difficult with very small seeds. Plant two
seeds per pot and later thin to one plant. This saves later
transplanting and means less root damage at planting time.
5. Cover
the seeds with dry vermiculite or milled sphagnum moss. The depth of
covering depends upon the size of the seeds. Very fine seeds, such as
petunia or begonia, should not be covered. Moisten the surface with a
fine mist, or place the container in a pan of warm water to absorb
moisture from the base. Do not place containers in water that is deep
enough to run over the top of the pot or flat. It may mix seeds or cover
them too deeply. Bottom watering helps avoid damping off by keeping the
soil surface dry. As a general rule, seeds other than very fine seeds
should be covered with soil to a depth of about two times their
diameter. Round seeds may be slowly dropped in the rows by tapping the
package as it is held over the rows. A shallow row about 1 to 2 inches
apart in a seed flat.
6. Cover
the container with polyethylene plastic film (a clear bag will do) or a
piece of window glass. Since they retain moisture, no additional
watering should be necessary until after seeds have germinated.
7. Place
seeds in a warm location for germination. Generally a temperature range
of 65-75°F (18-24°C) is best. A few plants, such as larkspur,
snapdragon, sweet pea, cabbage, broccoli, and cauliflower, are best
started at about 55°F (13°C). Do not place covered containers in direct
sunlight. 8. Watch daily for germination. Move to bright light, and
remove plastic or glass coverings as soon as germination is well
underway. If all seeds do not germinate at the same time, cut strips of
plastic or cloth and keep ungerminated rows covered until seedlings
appear. Seeds are quickly killed if allowed to dry during germination.
Watch closely for development of damping-off, and control promptly.
After germination, place those plants listed as preferring cool
temperatures in cool location.
Damping-Off
When
seedlings fall over at the ground line, they are being attacked by a
fungus disease known as damping off. If only a few seedlings are
attacked, dig out and discard the infected plants and soil, taking care
to dig well into the uninfected portion of the soil. Drench the entire
soil mass with a fungicide if the disease is scattered throughout the
flat or pot. This may not provide complete control. High temperature,
poor light, or excess moisture stimulate spread of the disease by
weakening plants to make them more susceptible to it. The best control
is cleanliness and prompt action when the disease appears.
Growing Seedlings
After
seeds have germinated, they must be promptly given the best possible
growing conditions to insure stocky vigorous plants for outdoor
planting. Cultural requirement must be considered carefully.
Light—Seedlings
must receive bright light promptly after germination. Place them in a
bright south window if possible. If a large, bright window is not
available, place the flats under fluorescent lights. A fixture
containing two fluorescent tubes is adequate. Use a combination of 1
cool white tube and 1 warm white tube. Place the seedlings 3-4 inches
from the tubes, and keep lights on for 14- 16 hours each day. An
automatic timer is useful. Be aware that fluorescent tubes produce
poorer light quality and lower light intensity with age. If seedlings
are correctly placed under lights and become spindly, it is probably the
fault of old fluorescent tubes. Two years is a typical bulb life. New
lights will alleviate this problem. As seedlings grow, the lights may
need to be raised to prevent leaf burn as seedlings touch the tubes.
Temperature—Most annual plants and vegetables prefer night
temperatures of 60-65°F (15-18°C). Day temperatures may run about 10°F
higher. If temperatures are warmer than this, leggy plants result. Cool
season vegetable crops and a few flowers prefer night temperatures no
higher than 55°F (13°C) and day temperatures near 65°F (18°C). An unused
bedroom, basement, or sun-porch is often a good location.
Moisture and watering—Good air humidity is an asset for producing
good plants. A humidifier may be placed as close to the growing area as
possible. Flats should never be over-watered. Allow drying between
waterings, but do not allow seedlings to wilt at any time.
Fertilization—Seedlings will need some fertilization for best
development. Those in totally artificial mixes without fertilizer need
prompt and regular fertilization. Use a soluble house plant fertilizer
such as 15-30-15 or similar analysis. Young, tender seedlings are easily
damaged by too much fertilizer. Apply fertilizer at about half of the
recommended strength a few days after seedlings have germinated. After
that, fertilize at 2-week intervals with the dilution recommended by the
manufacturer.
Transplanting and Thinning
As soon
as seedlings have developed at least one set of true leaves and are
large enough to handle, they should be transplanted to individual pots
or spaced out in flats. Failure to transplant promptly results in
crowded, spindly seedlings that will not develop properly. If a hotbed
is available, seedlings may be
transferred directly to it. Artificial mixes or a soil mix of one part
soil, one part sphagnum peat and one part sand may be used. To
transplant, carefully dig up the small plants with a knife, spatula, or
wooden label. Let this group of seedlings fall apart, and pick out
individual plants. Occasionally if seedlings have been too close, they
are difficult to separate. Gently ease them apart in small groups which
will make it easier to separate individual plants. Avoid tearing roots
in the process. Handle small seedlings by their leaves; small thin stems
break and crush easily. Poke a hole into the soil where the seedling
will be planted. Make it deep enough so that the seedling can be put at
the same depth it was growing in the seed flat. Small plants or slow
growers may be placed 1 inch apart and rapid growing, large seedlings
may be positioned about 2 inches apart. After planting, firm the soil
and water gently.
Reviewed
4/01 Purdue University Cooperative Extension Service
he use of mulch in managed landscapes is increasing rapidly.
Mulches are commonly used to enhance the beauty of landscapes, suppress
weeds, conserve soil moisture, and buffer plants from the damaging
effects of traffic and lawn equipment. Organic mulches also can improve
the soil structure and increase the fertility of landscape soils, which
often are compacted and lacking in organic matter, especially around
newly constructed buildings. Many woody landscape plants evolved in
forests where the soil is typically covered by a moist layer of decaying
leaves, twigs, and branches. Mulching trees and shrubs can recreate some
aspects of a forest’s soil environment, even in sun-baked landscapes far
from any forest.
*Note: These
vegetables are commonly grown as fall crops as well as spring/summer
transplants. Start seeds 5-7 weeks (7-9 weeks for cauliflower) before
plant out date. Planting out date depends on length of season for your
particular cultivar and the date of first frost for your location. It
will usually be between July 15 and August 1.
Hardiness Zone Map
Please Help Keep this Site Up and Going! Please Donate as little as
$1 via PayPal to help maintain this site. Every little bit helps and is
Greatly appreciated!